|Electrical Engineering New Jersey Firm Birdsall|
Electric cables are mainly meant for installation in buildings and industrial sites. Electrical cables may be made more flexible by stranding the wires. In this process, smaller individual wires are twisted or braided together to produce larger wires that are more flexible than solid wires of similar size. Bunching small wires before concentric stranding adds the most flexibility. Copper wires in a cable may be bare, or they may be plated with a thin layer of another metal, most often tin but sometimes gold, silver or some other material. Tin, gold, and silver are much less prone to oxidation than copper, which may lengthen wire life, and makes soldering easier. Tinning is also used to provide lubrication between strands. Tinning was used to help removal of rubber insulation. Tight lays during stranding makes the cable extensible (CBA – as in telephone handset cords).
A cable is two or more wires running side by side and bonded, twisted or braided together to form a single assembly. In mechanics cables, otherwise known as wire ropes, are used for lifting, hauling and towing or conveying force through tension. In electrical engineering, cables are used to carry electric currents. An optical cable contains one or more optical fibers in a protective jacket that supports the fibers.
Cables can be securely fastened and organized, such as by using trunking, cable trays, cable ties or cable lacing. Continuous-flex or flexible cables used in moving applications within cable carriers can be secured using strain relief devices or cable ties.
Electrical wiring in general refers to insulated conductors used to carry electricity, and associated devices. Electrical wiring as used to provide power in buildings and structures, commonly referred to as building wiring.
In methods of building construction, electrical cable jacket material is a potential source of fuel for fires. To limit the spread of fire along cable jacketing, an experienced electrical engineering new jersey company may employ contractors who use cable-coating materials or one may use cables with jacketing that is inherently fire retardant. The plastic covering on some metal clad cables may be stripped off at installation to reduce the fuel source for accidental fires. In Europe in particular, it is often customary to place inorganic wraps and boxes around cables in order to safeguard the adjacent areas from the potential fire threat associated with unprotected cable jacketing. However, this fire protection also traps heat generated from conductor losses, so the protection must be thin.
An electrical engineering company is responsible for creating the best use of electronic cables in any construction project.